Montana · USA

Taylor Fork Road to Taylor Hilgard Lodge

Madison Range alpine access via historic logging road

Difficult

The Taylor Fork cuts deep into Montana’s Madison Range, following an old logging road that climbs from sagebrush flats at 6,400 feet to alpine meadows above 8,000 feet. You’ll cross Taylor Creek multiple times before reaching the turnoff to Hilgard Lodge, where the road gets technical with loose rock and steep grades. The route passes through some of the finest elk country in the lower 48, with sweeping views of the Spanish Peaks and opportunities to explore dozens of unmarked mining claims from the 1890s gold rush.

This is a moderate to difficult route requiring high-clearance 4WD and low-range gearing for the final climbs. Summer and early fall offer the best conditions, though snow can linger at elevation well into July. No permits required, but bring extra fuel and water — the nearest services are 40 miles back in Big Sky. Multiple dispersed camping spots along Taylor Creek make this perfect for a weekend basecamp to explore the Madison backcountry on foot.

Be the first to save this trail

Trail Specs

Difficulty
Trail Type
Surface
Features, , , , ,
Length (miles)18 mi / 29 km
DurationFull day
Max elevation (ft)8200 ft
Best seasonJuly-October
Minimum vehicleHigh-clearance 4WD
Nearest townBig Sky, Montana
Land managerGallatin National Forest
Permit requiredNo
Cell serviceNone
Water crossingsYes
Dispersed campingYes
Start coordinates
End coordinates
Copy both for Google Maps directionsClick to copy the directions URL · or open it directly in a new tab
Find on GoogleSearch on Google →

Location

Ratings & Reviews

Quality
0 ratings
Difficulty
Official: Difficult

Trail Conditions

No recent condition reports. Be the first to post one.

Photos

No community photos yet.

Frequently asked questions

Can a stock Tacoma or 4Runner handle Taylor Fork Road, or do I need a lifted rig?

Stock high-clearance 4WD is the minimum — a bone-stock Tacoma or 4Runner can make it, but expect the underbody to get tested on rutted sections and rocky creek crossings. A lift and skid plates will save you headaches. Don't attempt this in a Subaru or crossover.

When does Taylor Fork Road actually open after winter, and is October pushing it?

The road typically opens in early-to-mid July depending on snowpack — some years it's passable late June, others not until July 15. October is doable but risky; early snowstorms can close the route fast and mud season on the way out is no joke. Check with Gallatin National Forest before heading out in fall.

Do I need a permit or pay any fees to run this trail or camp along it?

No permit required and no day-use fees for the trail itself — it's Gallatin National Forest dispersed access. Dispersed camping is free but follow Leave No Trace and the 14-day stay limit. No campfire permits required currently, but check current fire restrictions before you go, especially mid-summer.

What's the hardest section of this trail and what makes it genuinely difficult?

The upper stretch approaching the higher elevation gains throws the worst at you — deep ruts, loose rock, and at least one water crossing that can run fast with snowmelt earlier in the season. The combination of off-camber shelf road sections and limited turnaround spots is where inexperienced drivers get into trouble. Go slow, read the road ahead, and know your rig's limits.

There's zero cell service out here — how far is the nearest gas from the trailhead, and should I carry extra fuel?

Big Sky is your last reliable fuel stop, roughly 15-20 miles from the Taylor Fork trailhead — top off there without question. For an 18-mile trail with approach and exit, carry at minimum 2 extra gallons if your rig drinks fuel in 4WD low. There is no cell service on this trail, so a satellite communicator like a Garmin inReach is not optional if you're going solo.

Trail track

No GPX track for this trail yet. If you've driven it and have a track, contribute below.

Log in to contribute a GPX track.

Leave a comment

Your email address will not be published. Required fields are marked *